MANAEL’s popular Forward Assist Bolt Action Kits (FABA)
now available for the Oceania Precision rifles

 

Totally change the handling experience of your OP rifle with easy, ergonomic cycling of the action

 

Complete with a Easy-grip foreend from billet aluminium and all hardware needed so you can get out hunting, sooner.

No alterations to the firearm or action style and the kit can easily be removed.

FABA stands for Forward Assist Bolt Action. 
Think of it as an extension to the straight pull system.
Using the FABA Kit, you can operate the cycling action it from the foreend - just like an extension cable for your electrical outlet!

Rugged, hard wearing foreend fabricated from billet aluminum - no bending or flexing under pressure

Ideal for IPSC and hunting applications. 

Improved Bolt Knobs

Easy grip and ergonomic knurled charging-style bolt handles are included with the FABA Kit.

Featuring free spin action to keep you moving quickly when hunting or in competition.

The bolt knob is mounted on the left hand side of the rifle. 


Support local jobs

This product is 100% Australian made by Aussie firearms manufacturers MANAEL.
the innovative powerhouse behind the Warwick WFA FABA, S3S Rifle Action & Sedajo Chassis

 

Give me the quick details

  • Easy DIY install (no gunsmithing required). Does not change the action type of the rifle (it remains a bolt action).
  • Made in Australia. Designed and produced by MANAEL in Adelaide, Australia
     

Compatibility

These FABA Kits are designed specifically for the Oceania Precision model listed in the drop down menu.
This kit is not compatible with other firearms. Kits are not cross compatible between the SP15 and SP25.

Please ensure you are selecting the correct model from the drop-down menu.

How do I know if I have a Gen 1 or Gen 2 SP15 Oceania Precision rifle?

  • Gen 1: Serial numbers 0001 - 0030
  • Gen 2: Serial numbers 0031 and higher

 

Note on foreend length: 

This kit is designed to work on standard SP15 Ta length foreends. For modified or shortened foreends, you will need approx 300mm distance from from the bolt handle to the foreend when at rest (bolt in the forward position towards the muzzle). This will ensure the foreend grip as adequate connection to the guide strips through the whole cycle. 

 

Installing the FABA Kit for Oceania Precision rifles

Please read this product description and install information completely before starting installation or use. Ensure your firearm is clear of all ammunition and is verified as unloaded and your firearm is in safe working condition prior to installation and use. Run a patch through your barrel and muzzle devices before use. Consult a reloading manual for correct and safe load data prior to use. You are responsible for confirming and complying with your state or territory firearms laws and regulations and where appropriate, advising your state or territory firearms authorities prior to any modification. Please refer to your local state or territory firearms/weapons act and regulations.

 

1. Read these instructions in full TWICE before starting install. 

2. Fit Guide Strips
Fit the plastic strips to the foreend of the rifle using hardware provided.
Do not overtighten screws as this can cause guide strips to swell or split.
The screws should be "finger tight" (approx 1.5nm - 15inlbs of torque). 
The aim of the screws is to stop the guide strip from freely moving and slopping about.  However, please note, the strips are designed to move slightly under working conditions, you do not want them "completely secure / welded in place".
Some people choose to place a small dot of nail polish (which can be easily removed) or Locktite (which cannot easily be removed) onto the screw during install for extra assurance. This prevents loosening of the screws over time.
For a good fit, ensure screws are light finger tight, and a small amount of glue etc. on the threads and mlok prior to assembly, and let it dry / set when it is in position.

2. Fit handle and spigot/ link bar into rifle.
The upper receiver needs to be open for this to fit into place on the BCG (Bolt Carrier Group).
Close receiver.

3. Fit Foreend
Slide foreend grip onto guide strips. Ensure it slides smoothly, and the guide strips are in location which will always have a good amount covered during cycling when operating.

4. Connect link bar to Foreend
Attach link bar into foreend grip using hardware supplied.

5. Ensure smooth cycling and correct function of your Oceania Precision. Perform usual safety checks before operation. 

You are responsible for ensuring this item complies with your local state or territory laws and regulations, and comply with any registration or notification requirements before purchase. We do not accept returns on this item for change of mind or non compliance with regulations.

(MAN_FABA-OPX)

Includes

  • Billet aluminium foreend handle
  • Link Bar
  • Knurled charge knob
  • Bolt carrier group adaptor 

Weight: 245 grams

 

You are responsible for ensuring this item complies with your local state or territory laws and regulations, and comply with any registration or notification requirements before purchase. We do not accept returns on this item for change of mind or non compliance with regulations.

SKU MAN_FABA-OPX
Brand MANAEL
Shipping Weight 0.5050kg
Shipping Width 0.200m
Shipping Height 0.070m
Shipping Length 0.100m
Shipping Cubic 0.001400000m3

Be The First To Review This Product!

Help other Ignition Custom Engineering users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend

Others Also Bought

More From This Category